Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (9)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- M Stainless Steel (9)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(9)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(9)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(9)
- K Cast Iron (9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- N Non-Ferrous Materials (9)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(9)
- N1Wrought Aluminum (9)
- N3High-Silicon Aluminum Alloys Si >12.2%(9)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
- N6Carbon, Graphite Composites, CFRP (9)
- N7MMC's (9)
- S High-Temp Alloys (9)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(9)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(9)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(9)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(9)
Applications
Applications
ID Thread Turning (9)
Threading (9)
Type of Thread
Type of Thread
- 55 (8)
- 60 (9)
- ACME (5)
- API (1)
- API BUTTRESS (2)
- API RD (4)
- BSPT (4)
- BSW (8)
- M (9)
- NPT (4)
- NPTF (4)
- RD DIN 405 (8)
- STUB ACME (8)
- TR DIN 103 (6)
- UN (7)
- UNJ (4)
Over All Length [L]
Over All Length [L]
- 3.937 in(2)
- 4.3307 in(2)
- 4.9213 in(1)
- 5.5118 in(4)
a
Over All Length [L]
Over All Length [L]
- 100.0 mm(2)
- 110.0 mm(2)
- 125.0 mm(1)
- 140.0 mm(4)
a
Corner Radius
Corner Radius
- 0.001 in(4)
- 0.002 in(7)
- 0.003 in(4)
- 0.006 in(7)
- 0.008 in(4)
- 0.012 in(2)
- 0.017 in(1)
- 0.028 in(4)
- 0.036 in(1)
- 0.055 in(1)
a
Corner Radius
Corner Radius
- 0.025 mm(4)
- 0.05 mm(7)
- 0.075 mm(4)
- 0.15 mm(7)
- 0.2 mm(4)
- 0.3 mm(2)
- 0.425 mm(1)
- 0.7 mm(4)
- 0.925 mm(1)
- 1.4 mm(1)
a
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5010 (4)
- KC5025 (9)
- TN6025 (9)
Hand Of Tool
Hand Of Tool
- L (4)
- R (5)
F Dimension
F Dimension
- 13.0 mm(2)
- 17.0 mm(2)
- 22.0 mm(1)
- 27.0 mm(4)
a
F Dimension
F Dimension
- 0.5118 in(2)
- 0.6693 in(2)
- 0.8661 in(1)
- 1.063 in(4)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 25.0 mm(2)
- 32.0 mm(2)
- 40.0 mm(1)
- 50.0 mm(4)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.9843 in(2)
- 1.2598 in(2)
- 1.5748 in(1)
- 1.9685 in(4)
a
Maximum Bore Depth
Maximum Bore Depth
- 2.7685 in(2)
- 3.476 in(2)
- 3.908 in(1)
- 4.7252 in(4)
a
Maximum Bore Depth
Maximum Bore Depth
- 70.32 mm(2)
- 88.29 mm(2)
- 99.25 mm(1)
- 120.02 mm(4)
a
other
Insert Hand
Insert Hand
- L (4)
- R (5)
No filters matching ""
