フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (6)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- M Stainless Steel (6)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
- K Cast Iron (6)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
- N Non-Ferrous Materials (6)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (6)
- N6Carbon, Graphite Composites, CFRP (6)
- N3High-Silicon Aluminum Alloys Si >12.2%(6)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (6)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
- N1Wrought Aluminum (6)
- N7MMC's (6)
- S High-Temp Alloys (6)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
Type of Thread
Type of Thread
- 55 (6)
- 60 (6)
- ACME (3)
- API RD (6)
- BSPT (3)
- BSW (6)
- M (6)
- NPT (6)
- NPTF (3)
- RD DIN 405 (3)
- STUB ACME (3)
- TR DIN 103 (6)
- UN (6)
- UNJ (6)
Corner Radius
Corner Radius
- 0.002 in(6)
- 0.003 in(6)
- 0.004 in(3)
- 0.008 in(6)
- 0.01 in(3)
- 0.011 in(6)
- 0.012 in(3)
- 0.03 in(3)
to
Corner Radius
Corner Radius
- 0.05 mm(6)
- 0.075 mm(6)
- 0.1 mm(3)
- 0.2 mm(6)
- 0.25 mm(3)
- 0.275 mm(6)
- 0.3 mm(3)
- 0.75 mm(3)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5010 (6)
- KC5025 (6)
- KC720 (3)
- KC730 (3)
- PN120 (3)
- TN6025 (6)
- TTS (3)
Hand Of Tool
Hand Of Tool
- L (3)
- R (3)
F Dimension
F Dimension
- 8.0 mm(2)
- 10.0 mm(4)
to
F Dimension
F Dimension
- 0.315 in(2)
- 0.3937 in(4)
to
backEnd
System Size
System Size
- KM12 (2)
- KM16 (4)
Back-End Diameter
Back-End Diameter
- 12.0 mm(2)
- 16.0 mm(4)
to
other
Insert Hand
Insert Hand
- L (6)
- R (3)
No filters matching ""
