優れた汎用性

VariMill XTREME超硬ソリッドエンドミルは、切り屑排出の改良とコーナー強度の向上によって強化された汎用性の高い設計を採用することで、工具の破損やたわみを防止し、幅広いワーク材(鋼、ステンレス鋼、鋳鉄、超合金)や加工(ランピング加工、溝加工、プランジ加工、ドリル加工、ヘリカル補間加工、動的ミーリング加工など)において優れた性能を発揮するように設計されています。

特長:

  • 4つの非対称分割フルートと可変ねじれ角により、振動を低減
  • らせん状のエンドフェイスにより、切れ刃とコーナーでの安定性を向上させ、最大のランピング角とヘリカル加工を実現
  • 放物線状のコアにより、工具の安定性を向上させ、たわみと破損リスクを軽減
  • 非線形の深溝プロファイルにより、切り屑排出性を向上させ、ランピング加工とZ軸加工の性能を強化

上記をクリックして拡大/縮小する

VariMill XTREMEが製造現場を席巻

この製品設計は、すでに成功を収めているVariMill Iの主な特長を生かしつつ、切り屑排出性とコーナー安定性を向上させることで、幅広い被削材で期待以上の性能を発揮させます。

積極的な切削加工が可能になり、生産性が向上したことで、部品を仕上げるために必要なパス回数を減らすことができます。

VariMill XTREMEは、製造現場を席巻する準備が整っています... 準備できましたか?

VariMill™ XTREME™ 2021
(メトリック版パンフレット)

今すぐ確認する

VariMill XTREME製品を表示

フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (138)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(138)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(138)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(138)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(138)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(138)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(138)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(138)
    • M Stainless Steel (138)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(138)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(138)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(138)
    • K Cast Iron (138)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(138)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(138)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(138)
    • S High-Temp Alloys (138)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(138)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(138)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(138)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(138)
    • H Hardened Materials (138)
      • H2
        Hardened Materials 48-55 HRC(138)
      • H1
        Hardened Materials 44-48 HRC(138)
    Select All Star
    • CN (25)
    • DE (25)
    • GB (10)
    • US (10)
    Applications
    Applications
    • PocketPocket (134)
    • Pocket HelicalPocket Helical (134)
    • Pocket MillingPocket Milling (134)
    • Pocket Plunge MillingPocket Plunge Milling (134)
    • Profile MillingProfile Milling (4)
    • RampingRamping (134)
    • Shoulder Ball NoseShoulder Ball Nose (4)
    • Shoulder MillingShoulder Milling (134)
    • Shoulder RoughingShoulder Roughing (134)
    • Shoulder Square EndShoulder Square End (81)
    • Slot Ball NoseSlot Ball Nose (4)
    • Slot MillingSlot Milling (134)
    • Slot Square EndSlot Square End (134)
    • Trochoidal MillingTrochoidal Milling (138)
    Cutting Diameter
    Cutting Diameter
    • 0.1181 in(1)
    • 0.125 in(4)
    • 0.1575 in(5)
    • 0.1875 in(5)
    • 0.1969 in(5)
    • 0.2362 in(6)
    • 0.25 in(5)
    • 0.3125 in(8)
    • 0.315 in(7)
    • 0.375 in(5)
    • 0.3937 in(7)
    • 0.4724 in(7)
    • 0.5 in(26)
    • 0.625 in(3)
    • 0.6299 in(7)
    • 0.75 in(23)
    • 0.7874 in(6)
    • 0.9843 in(2)
    • 1.0 in(6)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 3.0 mm(1)
    • 3.175 mm(4)
    • 4.0 mm(5)
    • 4.7625 mm(5)
    • 5.0 mm(5)
    • 6.0 mm(6)
    • 6.35 mm(5)
    • 7.9375 mm(8)
    • 8.0 mm(7)
    • 9.525 mm(5)
    • 10.0 mm(7)
    • 12.0 mm(7)
    • 12.7 mm(26)
    • 15.875 mm(3)
    • 16.0 mm(7)
    • 19.05 mm(23)
    • 20.0 mm(6)
    • 25.0 mm(2)
    • 25.4 mm(6)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.35 mm(2)
    • 7.9375 mm(2)
    • 8.0 mm(4)
    • 9.5 mm(1)
    • 9.525 mm(2)
    • 10.0 mm(4)
    • 12.0 mm(6)
    • 12.7 mm(6)
    • 13.0 mm(2)
    • 15.875 mm(6)
    • 16.0 mm(7)
    • 18.0 mm(1)
    • 19.05 mm(6)
    • 20.0 mm(6)
    • 22.0 mm(1)
    • 22.225 mm(3)
    • 24.0 mm(6)
    • 25.4 mm(2)
    • 26.0 mm(1)
    • 31.75 mm(17)
    • 32.0 mm(6)
    • 38.1 mm(13)
    • 40.0 mm(6)
    • 50.0 mm(2)
    • 50.8 mm(10)
    • 57.15 mm(14)
    • 76.2 mm(2)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.25 in(2)
    • 0.3125 in(2)
    • 0.315 in(4)
    • 0.374 in(1)
    • 0.375 in(2)
    • 0.3937 in(4)
    • 0.4724 in(6)
    • 0.5 in(6)
    • 0.5118 in(2)
    • 0.625 in(6)
    • 0.6299 in(7)
    • 0.7087 in(1)
    • 0.75 in(6)
    • 0.7874 in(6)
    • 0.8661 in(1)
    • 0.875 in(3)
    • 0.9449 in(6)
    • 1.0 in(2)
    • 1.0236 in(1)
    • 1.25 in(17)
    • 1.2598 in(6)
    • 1.5 in(13)
    • 1.5748 in(6)
    • 1.9685 in(2)
    • 2.0 in(10)
    • 2.25 in(14)
    • 3.0 in(2)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 0.4724 in(3)
    • 0.5906 in(3)
    • 0.6299 in(1)
    • 0.7087 in(5)
    • 0.8268 in(1)
    • 0.9449 in(5)
    • 1.063 in(1)
    • 1.1811 in(5)
    • 1.2598 in(1)
    • 1.4173 in(6)
    • 1.597 in(7)
    • 1.8898 in(6)
    • 2.0205 in(8)
    • 2.3622 in(6)
    • 2.4565 in(7)
    • 2.9348 in(7)
    Reach MintoReach Max
    Reach
    Reach
    • 12.0 mm(3)
    • 15.0 mm(3)
    • 16.0 mm(1)
    • 18.0 mm(5)
    • 21.0 mm(1)
    • 24.0 mm(5)
    • 27.0 mm(1)
    • 30.0 mm(5)
    • 32.0 mm(1)
    • 36.0 mm(6)
    • 40.564 mm(7)
    • 48.0 mm(6)
    • 51.321 mm(8)
    • 60.0 mm(6)
    • 62.395 mm(7)
    • 74.543 mm(7)
    Reach MintoReach Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (101)
    • Weldon (37)
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(4)
    • 2.0 in(8)
    • 2.2441 in(17)
    • 2.25 in(3)
    • 2.4803 in(7)
    • 2.5 in(12)
    • 2.8346 in(7)
    • 3.0 in(2)
    • 3.2283 in(1)
    • 3.25 in(15)
    • 3.2677 in(7)
    • 3.5 in(2)
    • 3.622 in(6)
    • 4.0 in(20)
    • 4.5 in(2)
    • 4.5276 in(6)
    • 4.7638 in(2)
    • 5.0 in(15)
    • 6.0 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(4)
    • 50.8 mm(8)
    • 57.0 mm(17)
    • 57.15 mm(3)
    • 63.0 mm(7)
    • 63.5 mm(12)
    • 72.0 mm(7)
    • 76.2 mm(2)
    • 82.0 mm(1)
    • 82.55 mm(15)
    • 83.0 mm(7)
    • 88.9 mm(2)
    • 92.0 mm(6)
    • 101.6 mm(20)
    • 114.3 mm(2)
    • 115.0 mm(6)
    • 121.0 mm(2)
    • 127.0 mm(15)
    • 152.4 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (4)
    • CHAMFER (15)
    • RADIUS (85)
    • SQUARE END (34)
    Corner Radius
    Corner Radius
    • 0.0 in(49)
    • 0.008 in(5)
    • 0.012 in(1)
    • 0.015 in(23)
    • 0.02 in(8)
    • 0.03 in(16)
    • 0.039 in(3)
    • 0.059 in(6)
    • 0.06 in(5)
    • 0.079 in(1)
    • 0.09 in(4)
    • 0.118 in(4)
    • 0.12 in(5)
    • 0.157 in(1)
    • 0.19 in(2)
    • 0.197 in(1)
    • 0.25 in(2)
    • 0.375 in(2)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(49)
    • 0.2 mm(5)
    • 0.3 mm(1)
    • 0.375 mm(23)
    • 0.5 mm(8)
    • 0.75 mm(16)
    • 1.0 mm(3)
    • 1.5 mm(6)
    • 1.525 mm(5)
    • 2.0 mm(1)
    • 2.275 mm(4)
    • 3.0 mm(4)
    • 3.05 mm(5)
    • 4.0 mm(1)
    • 4.825 mm(2)
    • 5.0 mm(1)
    • 6.35 mm(2)
    • 9.525 mm(2)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(123)
    • 0.1 mm(6)
    • 0.2 mm(4)
    • 0.3 mm(5)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(123)
    • 0.0039 in(6)
    • 0.0079 in(4)
    • 0.0118 in(5)
    Corner Chamfer MintoCorner Chamfer Max
    application
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 45.0 (81)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.148 in(4)
    • 0.185 in(4)
    • 0.222 in(5)
    • 0.2961 in(6)
    • 0.3701 in(6)
    • 0.4441 in(6)
    • 0.5921 in(6)
    • 0.7402 in(6)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 3.76 mm(4)
    • 4.7 mm(4)
    • 5.64 mm(5)
    • 7.52 mm(6)
    • 9.4 mm(6)
    • 11.28 mm(6)
    • 15.04 mm(6)
    • 18.8 mm(6)
    Neck Diameter MintoNeck Diameter Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.175 mm(4)
    • 4.7625 mm(5)
    • 6.0 mm(17)
    • 6.35 mm(5)
    • 7.9375 mm(8)
    • 8.0 mm(7)
    • 9.525 mm(5)
    • 10.0 mm(7)
    • 12.0 mm(7)
    • 12.7 mm(26)
    • 15.875 mm(3)
    • 16.0 mm(7)
    • 19.05 mm(23)
    • 20.0 mm(6)
    • 25.0 mm(2)
    • 25.4 mm(6)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.125 in(4)
    • 0.1875 in(5)
    • 0.2362 in(17)
    • 0.25 in(5)
    • 0.3125 in(8)
    • 0.315 in(7)
    • 0.375 in(5)
    • 0.3937 in(7)
    • 0.4724 in(7)
    • 0.5 in(26)
    • 0.625 in(3)
    • 0.6299 in(7)
    • 0.75 in(23)
    • 0.7874 in(6)
    • 0.9843 in(2)
    • 1.0 in(6)
    Back-End Diameter MintoBack-End Diameter Max
    other
    Head Length [L2]
    Head Length [L2]
    • 0.315 in(3)
    • 0.3937 in(3)
    • 0.4724 in(5)
    • 0.5118 in(2)
    • 0.6299 in(6)
    • 0.7874 in(5)
    • 0.8661 in(1)
    • 0.9449 in(5)
    • 1.0236 in(1)
    • 1.2598 in(6)
    • 1.5748 in(6)
    Head Length [L2] MintoHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 8.0 mm(3)
    • 10.0 mm(3)
    • 12.0 mm(5)
    • 13.0 mm(2)
    • 16.0 mm(6)
    • 20.0 mm(5)
    • 22.0 mm(1)
    • 24.0 mm(5)
    • 26.0 mm(1)
    • 32.0 mm(6)
    • 40.0 mm(6)
    Head Length [L2] MintoHead Length [L2] Max
    No filters matching ""
    VariMill™ XTREME™
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO製品型番 材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)