真の90°を実現する8枚刃両面Victory™ショルダーフェイスミル(VSM)

VSM890は、真の90°壁面加工とステップダウン加工を行うことができます。カッター本体は内部クーラント供給を特長とし、ポケット型番システムを採用した使いやすさが向上した設計となっています。 

仕上げ機能が組み込まれたこの粗加工工具は、軸方向のステップダウン加工において、クラス最高の壁面仕上げを実現します。Weldonのエンドミルとシェルミルでご用意しています。

工場での多くのセットアップにおいて追加仕上げ加工は不要であり、加工時間を短縮し、工具コストを削減します。

    

特徴と利点

  • 不安定なセットアップ。
  • 低出力のスピンドル。
  • 軸方向の高い切り込み量Ap1。
  • 低フィード量。
  • アルミニウム加工。
  • 駆動工具。
フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (59)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(59)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(59)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(54)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(59)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(59)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(59)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(59)
    • M Stainless Steel (59)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(59)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(59)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(59)
    • K Cast Iron (57)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(57)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(57)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(57)
    • N Non-Ferrous Materials (50)
      • N1
        Wrought Aluminum (50)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(50)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(50)
    • S High-Temp Alloys (59)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(57)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(57)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(57)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(59)
    • H Hardened Materials (50)
      • H1
        Hardened Materials 44-48 HRC(50)
    Select All Star
    • CN (16)
    • DE (19)
    • GB (9)
    • IN (13)
    • SG (18)
    • US (20)
    Applications
    Applications
    • Face MillingFace Milling (44)
    • Pocket MillingPocket Milling (44)
    • Pocket Plunge MillingPocket Plunge Milling (44)
    • Shoulder MillingShoulder Milling (44)
    • Shoulder RoughingShoulder Roughing (44)
    • Shoulder Square EndShoulder Square End (44)
    • Slot MillingSlot Milling (44)
    • Slot Square EndSlot Square End (44)
    Cutting Diameter
    Cutting Diameter
    • 1.25 in(1)
    • 1.2598 in(1)
    • 1.5 in(1)
    • 1.5748 in(1)
    • 1.9685 in(2)
    • 2.0 in(2)
    • 2.4803 in(2)
    • 2.5 in(2)
    • 3.0 in(3)
    • 3.1496 in(3)
    • 3.937 in(3)
    • 4.0 in(3)
    • 4.9213 in(3)
    • 5.0 in(3)
    • 6.0 in(3)
    • 6.2992 in(3)
    • 7.874 in(3)
    • 8.0 in(3)
    • 9.8425 in(1)
    • 10.0 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(1)
    • 50.0 mm(2)
    • 50.8 mm(2)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(3)
    • 80.0 mm(3)
    • 100.0 mm(3)
    • 101.6 mm(3)
    • 125.0 mm(3)
    • 127.0 mm(3)
    • 152.4 mm(3)
    • 160.0 mm(3)
    • 200.0 mm(3)
    • 203.2 mm(3)
    • 250.0 mm(1)
    • 254.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.8 mm(44)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.3869 in(1)
    • 0.387 in(2)
    • 0.3871 in(1)
    • 0.3872 in(39)
    • 0.3873 in(1)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.2599 in(1)
    • 1.5748 in(5)
    • 1.575 in(4)
    • 1.75 in(3)
    • 1.9684 in(1)
    • 1.9685 in(4)
    • 1.9686 in(1)
    • 2.0 in(3)
    • 2.25 in(2)
    • 2.38 in(10)
    • 2.4803 in(9)
    • 2.5986 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 32.0 mm(1)
    • 40.0 mm(9)
    • 44.45 mm(3)
    • 50.0 mm(6)
    • 50.8 mm(3)
    • 57.15 mm(2)
    • 60.452 mm(10)
    • 63.0 mm(10)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (44)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (29)
    • C-Bolt Circle (11)
    • KL Screw (1)
    • Weldon (3)
    Number of Flutes
    Number of Flutes
    • 10 (4)
    • 11 (2)
    • 12 (2)
    • 14 (4)
    • 16 (4)
    • 22 (2)
    • 3 (2)
    • 4 (4)
    • 5 (6)
    • 6 (2)
    • 7 (6)
    • 8 (4)
    • 9 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5748 in(5)
    • 1.575 in(4)
    • 1.75 in(3)
    • 1.9684 in(1)
    • 1.9685 in(4)
    • 1.9686 in(1)
    • 2.0 in(3)
    • 2.38 in(10)
    • 2.4803 in(9)
    • 2.5986 in(1)
    • 3.504 in(1)
    • 4.53 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(9)
    • 44.45 mm(3)
    • 50.0 mm(6)
    • 50.8 mm(3)
    • 60.452 mm(10)
    • 63.0 mm(10)
    • 89.0 mm(1)
    • 115.06 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.031 in(62)
    • 0.063 in(48)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.8 mm(62)
    • 1.6 mm(48)
    Corner Radius MintoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15CM (47)
    • WK20PM (46)
    • WN25PM (45)
    • WP25PM (48)
    • WP35CM (46)
    • WP40PM (47)
    • WS40PM (48)
    • WU10PM (45)
    • WU20PM (45)
    • WU35PM (45)
    Hand Of Tool
    Hand Of Tool
    • R (44)
    Wiper Insert
    Wiper Insert
    • Y (22)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.9843 in(1)
    • 1.1614 in(1)
    • 1.3031 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 25.0 mm(1)
    • 29.5 mm(1)
    • 33.1 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (22)
    Insert IC Size
    Insert IC Size
    • 12.0 mm(22)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.472 in(22)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 12.0 mm(22)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.4724 in(22)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • ALP (1)
    • MH (8)
    • ML (2)
    • MM (11)
    Cutting Tool Material
    Cutting Tool Material
    • H W (22)
    Tolerance Class
    Tolerance Class
    • H (14)
    • P (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (3)
    • SHELL MILL (41)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(4)
    • 22.0 mm(4)
    • 22.01 mm(1)
    • 25.0 mm(1)
    • 25.4 mm(5)
    • 27.0 mm(3)
    • 32.0 mm(3)
    • 38.1 mm(6)
    • 40.0 mm(6)
    • 50.8 mm(3)
    • 60.0 mm(4)
    • 63.5 mm(4)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(4)
    • 0.8666 in(5)
    • 0.9843 in(1)
    • 1.0 in(5)
    • 1.063 in(3)
    • 1.26 in(3)
    • 1.5 in(6)
    • 1.575 in(6)
    • 2.0 in(3)
    • 2.36 in(4)
    • 2.5 in(4)
    Back-End Diameter MintoBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (22)
    Number of Inserts
    Number of Inserts
    • 3.0 (2)
    • 4.0 (4)
    • 5.0 (6)
    • 6.0 (2)
    • 7.0 (6)
    • 8.0 (4)
    • 9.0 (2)
    • 10.0 (4)
    • 11.0 (2)
    • 12.0 (2)
    • 14.0 (4)
    • 16.0 (4)
    • 22.0 (2)
    Number of Inserts MintoNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.2599 in(1)
    • 2.25 in(2)
    Head Length [L2] MintoHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 32.0 mm(1)
    • 57.15 mm(2)
    Head Length [L2] MintoHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO製品型番 材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)