Indexable Tooling
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (364)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(341)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(364)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(364)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(341)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(341)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(341)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(364)
- M Stainless Steel (361)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(361)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(361)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(361)
- K Cast Iron (351)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(344)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(344)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(351)
- N Non-Ferrous Materials (350)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (112)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (112)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(350)
- N3High-Silicon Aluminum Alloys Si >12.2%(253)
- N7MMC's (77)
- N6Carbon, Graphite Composites, CFRP (112)
- N1Wrought Aluminum (350)
- S High-Temp Alloys (4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- H Hardened Materials (43)
- H1Hardened Materials 44-48 HRC(43)
- H3Hardened Materials 56-60 HRC(43)
- H4Hardened Materials >60 HRC(43)
- H2Hardened Materials 48-55 HRC(43)
Select All Star
- IN (1)
- US (174)
Applications
Applications
Back Boring (27)
Grooving (4)
ID Thread Turning (3)
Multiple Direction Cutting (200)
OD Thread Turning (3)
Profiling (37)
TRN Boring (216)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 60.0 (9)
- 67.5 (5)
- 90.0 (54)
- 92.0 (2)
- 93.0 (19)
- 95.0 (152)
- 97.0 (8)
to
Connection Style
Connection Style
- Boring Bar Shank (251)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (1)
- 1.0 (122)
- 2.0 (160)
- 3.0 (228)
- 4.0 (12)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.375 in(2)
- 2.5 in(25)
- 2.75 in(12)
- 2.756 in(2)
- 2.757 in(1)
- 3.0 in(16)
- 3.125 in(1)
- 3.375 in(4)
- 3.5 in(6)
- 3.75 in(9)
- 3.95 in(3)
- 3.96 in(2)
- 3.997 in(2)
- 4.0 in(53)
- 4.25 in(5)
- 4.5 in(4)
- 4.75 in(2)
- 4.997 in(1)
- 5.0 in(11)
- 5.9843 in(1)
- 5.99 in(2)
- 6.0 in(54)
- 7.0 in(4)
- 8.0 in(12)
- 10.0 in(10)
- 12.0 in(2)
to
Over All Length [L]
Over All Length [L]
- 60.32 mm(2)
- 63.5 mm(25)
- 69.85 mm(11)
- 69.86 mm(1)
- 70.0 mm(3)
- 72.2 mm(1)
- 76.2 mm(15)
- 79.37 mm(1)
- 85.72 mm(3)
- 85.73 mm(1)
- 88.9 mm(6)
- 95.25 mm(9)
- 100.33 mm(3)
- 100.58 mm(2)
- 101.51 mm(2)
- 101.59 mm(1)
- 101.6 mm(52)
- 107.95 mm(5)
- 114.3 mm(4)
- 120.65 mm(2)
- 126.91 mm(1)
- 127.0 mm(11)
- 152.0 mm(1)
- 152.15 mm(2)
- 152.4 mm(53)
- 154.2 mm(1)
- 177.8 mm(4)
- 203.2 mm(12)
- 254.0 mm(10)
- 304.8 mm(1)
- 304.81 mm(1)
to
Corner Radius
Corner Radius
- 0.002 in(96)
- 0.004 in(21)
- 0.005 in(4)
- 0.007 in(264)
- 0.008 in(23)
- 0.015 in(254)
- 0.016 in(100)
- 0.031 in(127)
- 0.037 in(1)
to
Corner Radius
Corner Radius
- 0.05 mm(96)
- 0.1 mm(21)
- 0.125 mm(4)
- 0.175 mm(264)
- 0.2 mm(23)
- 0.375 mm(254)
- 0.4 mm(100)
- 0.775 mm(76)
- 0.8 mm(77)
- 0.95 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(170)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(170)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- C25 (155)
- C3 (36)
- CBN6 (40)
- CG5 (310)
- CG55 (15)
- CG6 (220)
- CM1 (247)
- TN7 (192)
- WBH10U (3)
- WBH30P (3)
- WDN10U (35)
- WDN15U (3)
- WDN25U (77)
- WK20CT (154)
- WM25CT (4)
- WP15CT (3)
- WP25CT (7)
Hand Of Tool
Hand Of Tool
- L (50)
- R (201)
Wiper Insert
Wiper Insert
- N (406)
F Dimension
F Dimension
- 0.61 mm(1)
- 1.4 mm(1)
- 1.78 mm(3)
- 2.41 mm(8)
- 2.64 mm(17)
- 2.82 mm(4)
- 2.95 mm(8)
- 2.97 mm(2)
- 3.02 mm(5)
- 3.1 mm(5)
- 3.12 mm(1)
- 3.18 mm(2)
- 3.2 mm(10)
- 3.4 mm(2)
- 3.43 mm(1)
- 3.61 mm(1)
- 3.63 mm(1)
- 3.68 mm(14)
- 3.7 mm(1)
- 3.71 mm(2)
- 3.73 mm(3)
- 3.734 mm(1)
- 3.86 mm(4)
- 3.91 mm(2)
- 3.94 mm(2)
- 3.96 mm(15)
- 4.27 mm(1)
- 4.42 mm(3)
- 4.44 mm(2)
- 4.7 mm(6)
- 4.75 mm(15)
- 4.8 mm(1)
- 5.36 mm(3)
- 5.54 mm(2)
- 5.59 mm(7)
- 5.61 mm(9)
- 5.66 mm(1)
- 5.79 mm(5)
- 5.94 mm(2)
- 5.99 mm(2)
- 6.38 mm(4)
- 6.55 mm(1)
- 6.6 mm(2)
- 6.81 mm(1)
- 6.93 mm(3)
- 7.01 mm(1)
- 7.07 mm(2)
- 7.11 mm(1)
- 7.29 mm(1)
- 7.52 mm(10)
- 7.54 mm(1)
- 7.92 mm(4)
- 8.13 mm(2)
- 8.59 mm(2)
- 8.61 mm(3)
- 8.64 mm(1)
- 8.71 mm(1)
- 8.76 mm(2)
- 8.89 mm(1)
- 8.97 mm(4)
- 9.5 mm(4)
- 9.65 mm(3)
- 9.98 mm(7)
- 10.34 mm(2)
- 11.1 mm(1)
- 11.68 mm(7)
- 13.92 mm(1)
- 14.86 mm(4)
to
F Dimension
F Dimension
- 0.024 in(1)
- 0.055 in(1)
- 0.07 in(3)
- 0.095 in(8)
- 0.104 in(17)
- 0.111 in(4)
- 0.116 in(8)
- 0.117 in(2)
- 0.119 in(5)
- 0.122 in(5)
- 0.123 in(1)
- 0.125 in(2)
- 0.126 in(10)
- 0.134 in(2)
- 0.135 in(1)
- 0.142 in(1)
- 0.143 in(1)
- 0.145 in(14)
- 0.146 in(3)
- 0.147 in(4)
- 0.152 in(4)
- 0.154 in(2)
- 0.155 in(2)
- 0.156 in(15)
- 0.168 in(1)
- 0.174 in(3)
- 0.175 in(2)
- 0.185 in(6)
- 0.187 in(15)
- 0.189 in(1)
- 0.211 in(3)
- 0.218 in(2)
- 0.22 in(7)
- 0.221 in(9)
- 0.223 in(1)
- 0.228 in(5)
- 0.234 in(2)
- 0.236 in(2)
- 0.251 in(4)
- 0.258 in(1)
- 0.26 in(2)
- 0.268 in(1)
- 0.272 in(1)
- 0.273 in(2)
- 0.276 in(1)
- 0.278 in(2)
- 0.28 in(1)
- 0.287 in(1)
- 0.296 in(10)
- 0.297 in(1)
- 0.312 in(4)
- 0.32 in(2)
- 0.338 in(2)
- 0.339 in(3)
- 0.34 in(1)
- 0.343 in(1)
- 0.345 in(2)
- 0.35 in(1)
- 0.353 in(4)
- 0.374 in(4)
- 0.38 in(3)
- 0.393 in(7)
- 0.407 in(2)
- 0.437 in(1)
- 0.46 in(7)
- 0.548 in(1)
- 0.585 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.57 mm(8)
- 5.18 mm(7)
- 5.182 mm(1)
- 5.28 mm(9)
- 5.54 mm(4)
- 5.69 mm(2)
- 5.78 mm(1)
- 5.79 mm(6)
- 5.791 mm(1)
- 5.94 mm(11)
- 6.2 mm(1)
- 6.6 mm(2)
- 6.78 mm(1)
- 6.91 mm(2)
- 6.98 mm(10)
- 7.06 mm(3)
- 7.08 mm(2)
- 7.09 mm(2)
- 7.24 mm(16)
- 7.42 mm(4)
- 7.52 mm(15)
- 7.92 mm(2)
- 8.18 mm(2)
- 8.61 mm(1)
- 8.81 mm(3)
- 9.04 mm(6)
- 9.09 mm(15)
- 9.14 mm(7)
- 9.16 mm(1)
- 9.98 mm(1)
- 10.01 mm(1)
- 10.16 mm(2)
- 10.34 mm(1)
- 10.49 mm(1)
- 10.5 mm(2)
- 10.67 mm(1)
- 10.68 mm(1)
- 10.74 mm(4)
- 11.13 mm(13)
- 11.15 mm(1)
- 11.38 mm(1)
- 11.89 mm(1)
- 12.14 mm(1)
- 12.22 mm(2)
- 12.5 mm(1)
- 12.9 mm(1)
- 13.08 mm(4)
- 13.16 mm(1)
- 13.34 mm(2)
- 13.67 mm(3)
- 13.72 mm(2)
- 13.84 mm(1)
- 14.3 mm(10)
- 15.32 mm(1)
- 15.37 mm(1)
- 15.39 mm(1)
- 15.88 mm(1)
- 16.0 mm(2)
- 16.26 mm(2)
- 16.38 mm(3)
- 16.967 mm(1)
- 16.97 mm(2)
- 17.02 mm(1)
- 17.09 mm(2)
- 17.25 mm(1)
- 17.27 mm(3)
- 17.48 mm(1)
- 18.29 mm(7)
- 19.05 mm(1)
- 19.43 mm(1)
- 20.24 mm(2)
- 21.59 mm(7)
- 23.75 mm(1)
- 24.61 mm(3)
- 27.94 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.18 in(8)
- 0.204 in(8)
- 0.208 in(9)
- 0.218 in(4)
- 0.224 in(2)
- 0.228 in(8)
- 0.234 in(11)
- 0.244 in(1)
- 0.26 in(2)
- 0.267 in(1)
- 0.272 in(2)
- 0.275 in(11)
- 0.278 in(3)
- 0.279 in(3)
- 0.2791 in(1)
- 0.285 in(16)
- 0.292 in(4)
- 0.296 in(15)
- 0.312 in(2)
- 0.322 in(2)
- 0.339 in(1)
- 0.347 in(3)
- 0.356 in(6)
- 0.358 in(15)
- 0.36 in(8)
- 0.394 in(1)
- 0.4 in(2)
- 0.407 in(1)
- 0.413 in(3)
- 0.42 in(2)
- 0.423 in(4)
- 0.438 in(13)
- 0.439 in(1)
- 0.448 in(1)
- 0.468 in(1)
- 0.478 in(1)
- 0.481 in(2)
- 0.492 in(1)
- 0.508 in(1)
- 0.515 in(4)
- 0.518 in(1)
- 0.525 in(2)
- 0.538 in(3)
- 0.54 in(1)
- 0.545 in(1)
- 0.563 in(10)
- 0.603 in(1)
- 0.605 in(1)
- 0.606 in(1)
- 0.625 in(1)
- 0.63 in(2)
- 0.64 in(2)
- 0.645 in(3)
- 0.668 in(3)
- 0.67 in(1)
- 0.673 in(2)
- 0.679 in(1)
- 0.68 in(3)
- 0.688 in(1)
- 0.72 in(7)
- 0.75 in(1)
- 0.765 in(1)
- 0.797 in(2)
- 0.85 in(7)
- 0.935 in(1)
- 0.969 in(3)
- 1.1 in(4)
- 5.4 in(1)
to
Cutting Direction
Cutting Direction
- B (159)
- E (70)
- P (13)
- S (9)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (26)
- NEUTRAL (ZERO) (56)
- POSITIVE-ZERO (169)
Maximum Bore Depth
Maximum Bore Depth
- 0.484 in(1)
- 0.5 in(10)
- 0.628 in(2)
- 0.75 in(15)
- 0.788 in(3)
- 0.875 in(5)
- 0.9 in(2)
- 0.936 in(3)
- 0.942 in(1)
- 0.9432 in(1)
- 0.944 in(2)
- 1.0 in(26)
- 1.012 in(1)
- 1.122 in(3)
- 1.125 in(16)
- 1.182 in(2)
- 1.25 in(21)
- 1.26 in(1)
- 1.416 in(6)
- 1.5 in(40)
- 1.5748 in(1)
- 1.872 in(7)
- 1.875 in(10)
- 1.888 in(1)
- 1.89 in(4)
- 2.0 in(12)
- 2.25 in(10)
- 2.5 in(11)
- 2.832 in(1)
- 3.0 in(17)
- 3.75 in(7)
- 3.78 in(1)
- 4.0 in(1)
- 4.5 in(4)
- 6.0 in(3)
to
Maximum Bore Depth
Maximum Bore Depth
- 12.3 mm(1)
- 12.7 mm(10)
- 16.0 mm(2)
- 19.04 mm(1)
- 19.048 mm(7)
- 19.05 mm(7)
- 20.0 mm(3)
- 22.22 mm(3)
- 22.225 mm(1)
- 22.23 mm(1)
- 22.86 mm(2)
- 23.76 mm(3)
- 24.0 mm(4)
- 25.39 mm(1)
- 25.4 mm(25)
- 25.72 mm(1)
- 28.56 mm(4)
- 28.57 mm(1)
- 28.572 mm(10)
- 28.578 mm(1)
- 28.58 mm(3)
- 30.0 mm(2)
- 31.748 mm(5)
- 31.75 mm(15)
- 31.76 mm(1)
- 32.0 mm(1)
- 36.0 mm(6)
- 38.04 mm(6)
- 38.08 mm(5)
- 38.1 mm(26)
- 38.12 mm(3)
- 40.0 mm(1)
- 47.55 mm(1)
- 47.58 mm(6)
- 47.61 mm(1)
- 47.62 mm(3)
- 47.622 mm(6)
- 48.0 mm(5)
- 50.8 mm(12)
- 57.12 mm(8)
- 57.15 mm(2)
- 63.48 mm(3)
- 63.5 mm(4)
- 63.52 mm(4)
- 72.0 mm(1)
- 76.2 mm(17)
- 95.22 mm(7)
- 96.0 mm(1)
- 101.6 mm(1)
- 114.24 mm(3)
- 114.3 mm(1)
- 152.4 mm(3)
to
Boring Bar Material
Boring Bar Material
- C (113)
- S (127)
Front-End
Clamp Style
Clamp Style
- S (217)
Cutting Width
Cutting Width
- 0.025 in(1)
- 0.03 in(4)
- 0.06 in(3)
to
Cutting Width
Cutting Width
- 0.635 mm(1)
- 0.762 mm(4)
- 1.524 mm(3)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (126)
- G-RHOMBIC 45 (44)
- GROOVING/CUTOFF MISC (6)
- T-TRIANGLE 60 (208)
- THREADING (6)
- W-TRIGON 80 (30)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.04 in(2)
- 0.06 in(2)
- 0.062 in(1)
- 0.075 in(1)
- 0.09 in(6)
- 0.091 in(4)
- 0.093 in(3)
- 0.098 in(1)
- 0.102 in(1)
- 0.116 in(1)
- 0.119 in(2)
- 0.12 in(4)
- 0.121 in(3)
- 0.125 in(5)
- 0.13 in(2)
- 0.146 in(1)
- 0.147 in(1)
- 0.168 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 1.02 mm(2)
- 1.52 mm(2)
- 1.57 mm(1)
- 1.91 mm(1)
- 2.27 mm(2)
- 2.28 mm(1)
- 2.29 mm(3)
- 2.31 mm(3)
- 2.32 mm(1)
- 2.36 mm(3)
- 2.49 mm(1)
- 2.59 mm(1)
- 2.94 mm(1)
- 3.02 mm(2)
- 3.04 mm(2)
- 3.05 mm(2)
- 3.07 mm(3)
- 3.17 mm(1)
- 3.18 mm(4)
- 3.3 mm(2)
- 3.7 mm(1)
- 3.73 mm(1)
- 4.27 mm(1)
to
Thread TPI
Thread TPI
- 24.0 (2)
- 48.0 (1)
to
Thread Pitch
Thread Pitch
- 1.0 mm(1)
- 2.5 mm(2)
to
Thread Pitch
Thread Pitch
- 1.0 in(1)
- 2.5 in(2)
to
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (38)
- G-RHOMBIC 45 (17)
- GROOVING/CUTOFF MISC (4)
- T-TRIANGLE 60 (97)
- THREADING (3)
- W-TRIGON 80 (11)
Insert IC Size
Insert IC Size
- 3.967 mm(2)
- 3.969 mm(1)
- 3.975 mm(35)
- 4.075 mm(32)
- 4.15 mm(1)
- 4.775 mm(9)
- 4.825 mm(3)
- 6.35 mm(50)
- 9.525 mm(35)
- 9.8 mm(1)
to
Insert IC Size
Insert IC Size
- 0.156 in(35)
- 0.1562 in(3)
- 0.16 in(32)
- 0.163 in(1)
- 0.188 in(9)
- 0.19 in(3)
- 0.25 in(50)
- 0.375 in(35)
- 0.386 in(1)
to
Cutting Edge Length
Cutting Edge Length
- 3.258 mm(3)
- 3.26 mm(2)
- 4.03 mm(26)
- 4.036 mm(2)
- 4.057 mm(1)
- 4.344 mm(4)
- 5.61 mm(3)
- 5.611 mm(3)
- 5.76 mm(4)
- 6.448 mm(1)
- 6.45 mm(4)
- 6.515 mm(2)
- 6.73 mm(4)
- 6.83 mm(3)
- 7.036 mm(5)
- 7.039 mm(1)
- 7.04 mm(22)
- 7.18 mm(1)
- 9.672 mm(3)
- 10.999 mm(3)
- 11.0 mm(34)
- 16.498 mm(3)
- 16.5 mm(27)
- 16.98 mm(1)
to
Cutting Edge Length
Cutting Edge Length
- 0.128 in(2)
- 0.1283 in(3)
- 0.1587 in(24)
- 0.1589 in(2)
- 0.159 in(2)
- 0.1597 in(1)
- 0.171 in(4)
- 0.2209 in(3)
- 0.221 in(3)
- 0.227 in(4)
- 0.2539 in(1)
- 0.254 in(4)
- 0.2565 in(2)
- 0.265 in(4)
- 0.269 in(3)
- 0.277 in(27)
- 0.2771 in(1)
- 0.283 in(1)
- 0.3808 in(3)
- 0.433 in(34)
- 0.4331 in(3)
- 0.6495 in(3)
- 0.6496 in(14)
- 0.65 in(13)
- 0.669 in(1)
to
Chip Breaker CBMD
Chip Breaker CBMD
- HP (4)
- LF (18)
- UF (4)
Cutting Tool Material
Cutting Tool Material
- B H (3)
- B L (40)
- D P (115)
- H T (192)
- H W (375)
Tolerance Class
Tolerance Class
- G (4)
- H (142)
- M (13)
Back-End
Connection Type
Connection Type
- BORING BAR (251)
Back-End Diameter
Back-End Diameter
- 3.96 mm(3)
- 4.0 mm(3)
- 4.76 mm(5)
- 4.762 mm(19)
- 4.763 mm(1)
- 5.0 mm(5)
- 6.0 mm(9)
- 6.34 mm(6)
- 6.35 mm(16)
- 7.925 mm(1)
- 7.93 mm(6)
- 7.937 mm(11)
- 8.0 mm(5)
- 9.52 mm(16)
- 9.524 mm(1)
- 9.525 mm(7)
- 9.53 mm(3)
- 10.0 mm(3)
- 12.0 mm(5)
- 12.7 mm(59)
- 15.87 mm(37)
- 15.875 mm(1)
- 15.88 mm(5)
- 16.0 mm(2)
- 19.04 mm(3)
- 19.045 mm(1)
- 19.05 mm(16)
- 25.4 mm(12)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(5)
- 1.0 in(5)
to
Other
Insert Hand
Insert Hand
- L (199)
- N (370)
- R (199)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
