Filtreleri Seçin
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (6)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
    • M Stainless Steel (6)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
    • K Cast Iron (6)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
    • N Non-Ferrous Materials (6)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(6)
      • N1
        Wrought Aluminum (6)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (6)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (6)
      • N6
        Carbon, Graphite Composites, CFRP (6)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
      • N7
        MMC's (6)
    • S High-Temp Alloys (6)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
    Type of Thread
    Type of Thread
    • 55 (6)
    • 60 (6)
    • ACME (4)
    • API (1)
    • API BUTTRESS (1)
    • API RD (3)
    • BSPT (3)
    • BSW (6)
    • M (6)
    • NPT (3)
    • NPTF (3)
    • RD DIN 405 (6)
    • STUB ACME (6)
    • TR DIN 103 (4)
    • UN (5)
    • UNJ (3)
    Over All Length [L]
    Over All Length [L]
    • 2.3622 in(3)
    • 2.7559 in(2)
    • 4.1339 in(1)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 60.0 mm(3)
    • 70.0 mm(2)
    • 105.0 mm(1)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(3)
    • 0.002 in(5)
    • 0.003 in(3)
    • 0.006 in(5)
    • 0.008 in(3)
    • 0.012 in(1)
    • 0.017 in(1)
    • 0.028 in(3)
    • 0.036 in(1)
    • 0.055 in(1)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(3)
    • 0.05 mm(5)
    • 0.075 mm(3)
    • 0.15 mm(5)
    • 0.2 mm(3)
    • 0.3 mm(1)
    • 0.425 mm(1)
    • 0.7 mm(3)
    • 0.925 mm(1)
    • 1.4 mm(1)
    Corner Radius Min-Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC5010 (3)
    • KC5025 (6)
    • TN6025 (6)
    Hand Of Tool
    Hand Of Tool
    • L (2)
    • R (4)
    F Dimension
    F Dimension
    • 12.0 mm(2)
    • 14.0 mm(1)
    • 17.0 mm(2)
    • 27.0 mm(1)
    F Dimension Min-F Dimension Max
    F Dimension
    F Dimension
    • 0.4724 in(2)
    • 0.5512 in(1)
    • 0.6693 in(2)
    • 1.063 in(1)
    F Dimension Min-F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 20.0 mm(2)
    • 25.0 mm(1)
    • 32.0 mm(2)
    • 50.0 mm(1)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.7874 in(2)
    • 0.9843 in(1)
    • 1.2598 in(2)
    • 1.9685 in(1)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.4173 in(3)
    • 1.8504 in(2)
    • 3.1496 in(1)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 36.0 mm(3)
    • 47.0 mm(2)
    • 80.0 mm(1)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    other
    Insert Hand
    Insert Hand
    • L (2)
    • R (4)
    No filters matching ""
    Laydown Threading
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)