RD10

Filtreleri Seçin
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (16)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(16)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(16)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(16)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(16)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(16)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(16)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(16)
    • M Stainless Steel (16)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(16)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(16)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(16)
    • K Cast Iron (16)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(16)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(16)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(16)
    • S High-Temp Alloys (16)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(16)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(16)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(16)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(16)
    • H Hardened Materials (16)
      • H3
        Hardened Materials 56-60 HRC(16)
      • H1
        Hardened Materials 44-48 HRC(16)
      • H2
        Hardened Materials 48-55 HRC(16)
    Applications
    Applications
    • Face MillingFace Milling (16)
    • PocketPocket (16)
    • Pocket HelicalPocket Helical (16)
    • Pocket MillingPocket Milling (16)
    • Profile MillingProfile Milling (16)
    • RampingRamping (16)
    • Shoulder Ball NoseShoulder Ball Nose (16)
    • Shoulder MillingShoulder Milling (16)
    • Slot MillingSlot Milling (16)
    • Slot Square EndSlot Square End (16)
    Cutting Diameter
    Cutting Diameter
    • 0.394 in(5)
    • 0.472 in(1)
    • 0.591 in(4)
    • 0.787 in(1)
    • 1.181 in(1)
    • 1.26 in(2)
    • 1.575 in(1)
    • 1.654 in(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 10.0 mm(5)
    • 12.0 mm(1)
    • 15.0 mm(4)
    • 20.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(2)
    • 40.0 mm(1)
    • 42.0 mm(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.196 in(1)
    • 0.197 in(15)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 1.181 in(1)
    • 1.378 in(1)
    • 1.575 in(6)
    • 1.693 in(1)
    • 1.772 in(1)
    • 1.969 in(1)
    • 2.362 in(1)
    • 2.756 in(1)
    • 3.15 in(1)
    • 3.937 in(2)
    Reach Min-Reach Max
    Reach
    Reach
    • 30.0 mm(1)
    • 35.0 mm(1)
    • 40.0 mm(6)
    • 43.0 mm(1)
    • 45.0 mm(1)
    • 50.0 mm(1)
    • 60.0 mm(1)
    • 70.0 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(2)
    Reach Min-Reach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (4)
    • Screw-On Connection (4)
    • Straight-Cylindrical (6)
    • Weldon (2)
    Number of Flutes
    Number of Flutes
    • 2 (8)
    • 3 (2)
    • 4 (1)
    • 5 (2)
    • 6 (3)
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(3)
    • 1.969 in(2)
    • 2.244 in(1)
    • 2.657 in(1)
    • 2.736 in(1)
    • 4.331 in(2)
    • 5.512 in(1)
    • 6.299 in(2)
    • 7.087 in(2)
    • 8.661 in(1)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(3)
    • 50.0 mm(2)
    • 57.0 mm(1)
    • 67.5 mm(1)
    • 69.5 mm(1)
    • 110.0 mm(2)
    • 140.0 mm(1)
    • 160.0 mm(2)
    • 180.0 mm(2)
    • 220.0 mm(1)
    Over All Length [L] Min-Over All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TN2505 (16)
    • TN6525 (16)
    • TN6540 (16)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 3.0 (1)
    • 5.2 (1)
    • 5.8 (1)
    • 6.0 (1)
    • 7.2 (1)
    • 8.0 (1)
    • 9.0 (3)
    • 10.0 (1)
    • 12.0 (1)
    • 20.0 (5)
    Maximum Ramp Angle Min-Maximum Ramp Angle Max
    frontEnd
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (8)
    • SCREW-ON (4)
    • SHELL MILL (4)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(2)
    • 18.0 mm(1)
    • 20.0 mm(3)
    • 21.0 mm(1)
    • 22.0 mm(2)
    • 25.0 mm(5)
    • 29.0 mm(2)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.6299 in(2)
    • 0.7087 in(1)
    • 0.7874 in(3)
    • 0.8268 in(1)
    • 0.8661 in(2)
    • 0.9843 in(5)
    • 1.1417 in(2)
    Back-End Diameter Min-Back-End Diameter Max
    other
    Number of Inserts
    Number of Inserts
    • 2.0 (8)
    • 3.0 (2)
    • 4.0 (1)
    • 5.0 (2)
    • 6.0 (3)
    Number of Inserts Min-Number of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.181 in(1)
    • 1.378 in(1)
    • 1.575 in(3)
    • 1.693 in(1)
    • 1.772 in(1)
    • 2.362 in(1)
    • 2.756 in(1)
    • 3.15 in(1)
    • 3.937 in(2)
    Head Length [L2] Min-Head Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 30.0 mm(1)
    • 35.0 mm(1)
    • 40.0 mm(3)
    • 43.0 mm(1)
    • 45.0 mm(1)
    • 60.0 mm(1)
    • 70.0 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(2)
    Head Length [L2] Min-Head Length [L2] Max
    No filters matching ""
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)