VXF™-07 Series

Wybierz filtry
Filtry
    Wyświetl filtry w
    Metryczne
    Calowe
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (22)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
    • M Stainless Steel (22)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
    • K Cast Iron (21)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(21)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
    • N Non-Ferrous Materials (20)
      • N1
        Wrought Aluminum (20)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(20)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(20)
    • S High-Temp Alloys (22)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(22)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(22)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(22)
    • H Hardened Materials (21)
      • H1
        Hardened Materials 44-48 HRC(21)
    Select All Star
    • CN (8)
    • DE (8)
    • GB (4)
    • IN (5)
    • SG (4)
    • US (3)
    Applications
    Applications
    • Face MillingFace Milling (9)
    • PocketPocket (9)
    • Pocket HelicalPocket Helical (9)
    • Pocket Plunge MillingPocket Plunge Milling (9)
    • Profile MillingProfile Milling (9)
    • RampingRamping (9)
    • Shoulder RoughingShoulder Roughing (9)
    • Shoulder Square EndShoulder Square End (9)
    • Slot Square EndSlot Square End (9)
    Cutting Diameter
    Cutting Diameter
    • 0.2714 in(1)
    • 0.2762 in(2)
    • 0.3524 in(1)
    • 0.3841 in(2)
    • 0.4212 in(2)
    • 0.6157 in(2)
    • 0.6314 in(2)
    • 0.879 in(1)
    • 0.8791 in(1)
    • 0.8889 in(1)
    • 1.1289 in(1)
    • 1.2037 in(1)
    • 1.5972 in(1)
    • 1.6287 in(1)
    Cutting Diameter MindoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 6.895 mm(1)
    • 7.014 mm(1)
    • 7.015 mm(1)
    • 8.952 mm(1)
    • 9.757 mm(2)
    • 10.699 mm(2)
    • 15.639 mm(2)
    • 16.038 mm(2)
    • 22.327 mm(1)
    • 22.328 mm(1)
    • 22.577 mm(1)
    • 28.674 mm(1)
    • 30.573 mm(1)
    • 40.57 mm(1)
    • 41.37 mm(1)
    Cutting Diameter MindoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.9 mm(19)
    Cutting Length MindoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.0354 in(18)
    • 0.0355 in(1)
    Cutting Length MindoCutting Length Max
    Reach
    Reach
    • 0.9843 in(3)
    • 1.2598 in(2)
    • 1.2599 in(1)
    • 1.3779 in(2)
    • 1.378 in(2)
    • 1.5748 in(1)
    • 1.5749 in(1)
    • 1.575 in(1)
    • 1.6929 in(1)
    • 1.693 in(1)
    • 2.5 in(1)
    • 3.0 in(1)
    • 3.5 in(2)
    Reach MindoReach Max
    Reach
    Reach
    • 25.0 mm(3)
    • 32.0 mm(3)
    • 35.0 mm(4)
    • 40.0 mm(2)
    • 40.006 mm(1)
    • 43.0 mm(2)
    • 63.5 mm(1)
    • 76.2 mm(1)
    • 88.9 mm(2)
    Reach MindoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 10.0 (13)
    • 11.0 (6)
    Tool Cutting Edge Angle MindoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (4)
    • Screw-On Connection (7)
    • Straight-Cylindrical (8)
    Number of Flutes
    Number of Flutes
    • 2 (4)
    • 3 (4)
    • 4 (4)
    • 5 (5)
    • 7 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.2599 in(2)
    • 1.5749 in(1)
    • 1.5751 in(1)
    • 1.6811 in(1)
    • 2.1653 in(1)
    • 2.1654 in(1)
    • 2.2441 in(2)
    • 2.6575 in(1)
    • 2.6576 in(1)
    • 7.0 in(1)
    • 7.0866 in(2)
    • 7.4803 in(1)
    • 7.5 in(1)
    • 7.874 in(1)
    • 8.0 in(2)
    Over All Length [L] MindoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 32.0 mm(2)
    • 40.0 mm(1)
    • 40.006 mm(1)
    • 42.7 mm(1)
    • 55.0 mm(2)
    • 57.0 mm(2)
    • 67.5 mm(2)
    • 177.8 mm(1)
    • 180.0 mm(2)
    • 190.0 mm(1)
    • 190.5 mm(1)
    • 200.0 mm(1)
    • 203.2 mm(2)
    Over All Length [L] MindoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.031 in(21)
    • 0.039 in(21)
    Corner Radius MindoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.8 mm(21)
    • 1.0 mm(21)
    Corner Radius MindoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WP25PM (20)
    • WP40PM (20)
    • WS40PM (20)
    • WU10PM (20)
    Hand Of Tool
    Hand Of Tool
    • R (19)
    Wiper Insert
    Wiper Insert
    • N (4)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.7 (2)
    • 1.0 (2)
    • 1.4 (1)
    • 2.2 (3)
    • 2.69 (2)
    • 3.4 (2)
    • 4.34 (1)
    • 5.4 (1)
    • 5.9 (2)
    • 6.74 (2)
    • 8.2 (1)
    Maximum Ramp Angle MindoMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.3346 in(1)
    • 0.4134 in(1)
    • 0.4921 in(1)
    • 0.5112 in(1)
    • 0.5315 in(1)
    • 0.6102 in(1)
    • 0.6516 in(1)
    • 0.6693 in(1)
    • 0.689 in(1)
    • 0.8858 in(2)
    • 1.1516 in(1)
    Neck Diameter MindoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 8.5 mm(1)
    • 10.5 mm(1)
    • 12.5 mm(1)
    • 12.985 mm(1)
    • 13.5 mm(1)
    • 15.5 mm(1)
    • 16.55 mm(1)
    • 17.0 mm(1)
    • 17.5 mm(1)
    • 22.5 mm(2)
    • 29.25 mm(1)
    Neck Diameter MindoNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (4)
    Insert IC Size
    Insert IC Size
    • 7.3 mm(4)
    Insert IC Size MindoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.287 in(4)
    Insert IC Size MindoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 7.304 mm(4)
    Cutting Edge Length MindoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.2875 in(2)
    • 0.288 in(2)
    Cutting Edge Length MindoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • MH (2)
    • MM (2)
    Cutting Tool Material
    Cutting Tool Material
    • H W (4)
    Tolerance Class
    Tolerance Class
    • P (4)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (8)
    • SCREW-ON (7)
    • SHELL MILL (4)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(1)
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 18.0 mm(3)
    • 19.05 mm(3)
    • 20.0 mm(1)
    • 21.0 mm(2)
    • 22.0 mm(1)
    • 25.0 mm(1)
    • 25.4 mm(1)
    • 29.0 mm(2)
    • 31.75 mm(1)
    Back-End Diameter MindoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5118 in(1)
    • 0.625 in(1)
    • 0.6299 in(2)
    • 0.7087 in(3)
    • 0.75 in(3)
    • 0.7874 in(1)
    • 0.8268 in(2)
    • 0.8661 in(1)
    • 0.9843 in(1)
    • 1.0 in(1)
    • 1.1417 in(2)
    • 1.25 in(1)
    Back-End Diameter MindoBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (4)
    Number of Inserts
    Number of Inserts
    • 2.0 (4)
    • 3.0 (4)
    • 4.0 (4)
    • 5.0 (5)
    • 7.0 (2)
    Number of Inserts MindoNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 0.9843 in(3)
    • 1.2598 in(2)
    • 1.3779 in(2)
    • 1.378 in(2)
    • 1.5748 in(1)
    • 1.575 in(1)
    • 1.6929 in(1)
    • 1.693 in(1)
    • 2.5 in(1)
    • 3.0 in(1)
    • 3.5 in(2)
    Head Length [L2] MindoHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 25.0 mm(3)
    • 32.0 mm(2)
    • 35.0 mm(4)
    • 40.0 mm(1)
    • 40.006 mm(1)
    • 43.0 mm(2)
    • 63.5 mm(1)
    • 76.2 mm(1)
    • 88.9 mm(2)
    Head Length [L2] MindoHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
    Select the destination where you want to move do.
    Nowe Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Oznaczenie katalogowe ISO

    Oznaczenie katalogowe ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
    Session expired due to inactivity, please login again
    Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
    produkty dodane do koszyka

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Oznaczenie katalogowe ISO Gatunek  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)