Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Downloaded file will be available after import in the {{cadTool}} tool library.
WU20PE | 날당 이송 fz(fz = mm/th) 는 사이드 밀링(A)용입니다. 슬로팅(B)의 경우 fz를 20%까지 줄이십시오. | ||||||||||||||||||
사이드 밀링 | 슬로팅 | 가공 속도 | D1 | ||||||||||||||||
소재 그룹 | ap | ae | ap | 최소 | 초기값 | 최대 | mm | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | |
P | 0 | ap1max | 0,4 x D | 0,3 x D | 150 | – | 200 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 1 | ap1max | 0,4 x D | 0,3 x D | 150 | – | 200 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 2 | ap1max | 0,4 x D | 0,3 x D | 140 | – | 190 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 3 | ap1max | 0,4 x D | 0,3 x D | 120 | – | 160 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
P | 4 | ap1max | 0,4 x D | 0,3 x D | 90 | – | 150 | fz | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
P | 5 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 100 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
P | 6 | ap1max | 0,4 x D | 0,3 x D | 50 | – | 75 | fz | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
M | 1 | ap1max | 0,4 x D | 0,3 x D | 90 | – | 115 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
M | 2 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 80 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
M | 3 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 70 | fz | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
K | 1 | ap1max | 0,4 x D | 0,3 x D | 120 | – | 150 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
K | 2 | ap1max | 0,4 x D | 0,3 x D | 110 | – | 140 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
K | 3 | ap1max | 0,4 x D | 0,3 x D | 110 | – | 130 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
S | 1 | ap1max | 0,3 x D | 0,2 x D | 50 | – | 90 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
S | 2 | ap1max | 0,3 x D | 0,2 x D | 25 | – | 40 | fz | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 3 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 80 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
S | 4 | ap1max | 0,4 x D | 0,3 x D | 50 | – | 60 | fz | 0,016 | 0,021 | 0,026 | 0,037 | 0,045 | 0,052 | 0,058 | 0,064 | 0,069 | 0,074 | 0,084 |
H | 1 | ap1max | 0,4 x D | 0,3 x D | 80 | – | 140 | fz | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
H | 2 | ap1max | 0,2 x D | 0,3 x D | 70 | – | 120 | fz | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
WU20PE | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||||||
사이드 밀링 | 슬로팅 | 가공 속도 | D1 | |||||||||||||||
소재 그룹 | ap | ae | ap | 최소 | 초기값 | 최대 | frac. | 3/16 | 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |
in | 0.1875 | 0.2500 | 0.3125 | 0.3750 | 0.4375 | 0.5000 | 0.6250 | 0.7500 | 1.0000 | 1.2500 | ||||||||
P | 0 | ap1max | 0.4 x D | 0.3 x D | 490 | – | 660 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
P | 1 | ap1max | 0.4 x D | 0.3 x D | 490 | – | 660 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
P | 2 | ap1max | 0.4 x D | 0.3 x D | 460 | – | 620 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
P | 3 | ap1max | 0.4 x D | 0.3 x D | 390 | – | 520 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
P | 4 | ap1max | 0.4 x D | 0.3 x D | 300 | – | 490 | IPT | 0.0010 | 0.0014 | 0.0017 | 0.0020 | 0.0023 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
P | 5 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 330 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
P | 6 | ap1max | 0.4 x D | 0.3 x D | 160 | – | 250 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0017 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |
M | 1 | ap1max | 0.4 x D | 0.3 x D | 300 | – | 380 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
M | 2 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 260 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
M | 3 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 230 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0017 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |
K | 1 | ap1max | 0.4 x D | 0.3 x D | 390 | – | 490 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
K | 2 | ap1max | 0.4 x D | 0.3 x D | 360 | – | 460 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
K | 3 | ap1max | 0.4 x D | 0.3 x D | 360 | – | 430 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
S | 1 | ap1max | 0.3 x D | 0.2 x D | 160 | – | 300 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
S | 2 | ap1max | 0.3 x D | 0.2 x D | 80 | – | 130 | IPT | 0.0006 | 0.0008 | 0.0010 | 0.0012 | 0.0014 | 0.0015 | 0.0018 | 0.0021 | 0.0024 | 0.0026 |
S | 3 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 260 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
S | 4 | ap1max | 0.4 x D | 0.3 x D | 160 | – | 200 | IPT | 0.0008 | 0.0011 | 0.0014 | 0.0017 | 0.0019 | 0.0021 | 0.0025 | 0.0028 | 0.0033 | 0.0036 |
H | 1 | ap1max | 0.4 x D | 0.3 x D | 260 | – | 460 | IPT | 0.0010 | 0.0014 | 0.0017 | 0.0020 | 0.0023 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
H | 2 | ap1max | 0.2 x D | 0.3 x D | 230 | – | 390 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0017 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |
ISO 카탈로그 번호
ANSI 카탈로그 번호
to find similar products.Please select a file to download
Models
Product data
I have read and accepted the Terms & Conditions of use
Can’t find the file type you’re looking for?
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
SAP Material Number | ISO 카탈로그 번호 | 등급 |
---|
You are about to leave the Solution building process.
Are you sure you want to leave?