KM63TS™ Cutting Units
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (8)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(8)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(8)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(8)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(8)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(8)
- M Stainless Steel (8)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(8)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(8)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(8)
- K Cast Iron (15)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
- N Non-Ferrous Materials (11)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (8)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(8)
- N1Wrought Aluminum (8)
- N7MMC's (6)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- N6Carbon, Graphite Composites, CFRP (8)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (11)
- S High-Temp Alloys (15)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(11)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
- H Hardened Materials (11)
- H2Hardened Materials 48-55 HRC(11)
- H1Hardened Materials 44-48 HRC(11)
- H3Hardened Materials 56-60 HRC(11)
- H4Hardened Materials >60 HRC(11)
- C CFRP Materials (8)
- C1CFRP, CFRP / CFRP (8)
- C2CFRP / Aluminium CFRP / Non-Ferrous (6)
Applications
Applications
Facing (16)
Multiple Direction Cutting (1)
Profiling (1)
TRN Boring (2)
Turning (19)
Cutting Condition Material
Cutting Condition Material
- H-All (9)
- K-All (13)
- K1 (3)
- M-All (8)
- N-All (6)
- P-All (8)
- S-All (8)
- S2 (9)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (13)
- Lightly Interrupted Cut (13)
- Smooth Cut (13)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 75.0 (13)
- 90.0 (5)
to
Connection Style
Connection Style
- KM (17)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (10)
- 1.0 (2)
- 3.0 (3)
- 4.0 (7)
- 6.0 (5)
- 8.0 (10)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.362 in(3)
- 2.3622 in(16)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(19)
to
Corner Radius
Corner Radius
- 0.008 in(2)
- 0.016 in(6)
- 0.031 in(15)
- -0.039 in(10)
- 0.047 in(15)
- 0.063 in(15)
- 0.094 in(6)
- 0.125 in(1)
- 0.126 in(4)
- 0.157 in(2)
to
Corner Radius
Corner Radius
- 0.2 mm(2)
- 0.4 mm(6)
- 0.8 mm(15)
- -1.0 mm(10)
- 1.2 mm(15)
- 1.6 mm(15)
- 2.4 mm(6)
- 3.175 mm(1)
- 3.2 mm(4)
- 4.0 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (11)
- CW3020 (5)
- CW5025 (5)
- K090 (1)
- K1 (2)
- K313 (6)
- K68 (11)
- KB1340 (6)
- KB1345 (2)
- KB1610 (3)
- KB1630 (2)
- KB9640 (5)
- KBH10 (3)
- KBH10B (2)
- KBH20 (3)
- KBH20B (2)
- KBK45 (5)
- KC5010 (8)
- KC5025 (6)
- KC5410 (5)
- KC730 (4)
- KC850 (8)
- KCK05 (3)
- KCK05B (3)
- KCK15 (6)
- KCK15B (6)
- KCK20 (8)
- KCK20B (4)
- KCM15 (8)
- KCM15B (6)
- KCM25 (6)
- KCM25B (8)
- KCM35 (8)
- KCM35B (3)
- KCP05 (3)
- KCP05B (4)
- KCP10 (8)
- KCP10B (8)
- KCP25 (8)
- KCP25B (8)
- KCP25C (8)
- KCP30 (6)
- KCP30B (8)
- KCP40 (8)
- KCP40B (8)
- KCPK05 (7)
- KCS10B (7)
- KCU10 (8)
- KCU10B (8)
- KCU25 (8)
- KCU25B (8)
- KD1400 (2)
- KD1425 (2)
- KT315 (3)
- KTP10 (3)
- KTP25S (2)
- KY1540 (7)
- KY1615 (3)
- KY3500 (14)
- KY4300 (5)
- KY4400 (9)
- KYHK15B (9)
- KYK10 (3)
- KYK25 (6)
- KYS25 (6)
- KYS30 (6)
- THM (9)
- THM-X (1)
- THMF-X (3)
- TN10P (3)
- TN10U (2)
- TN15M (3)
- TN15U (3)
- TN2000 (6)
- TN20K (5)
- TN20P (6)
- TN30M (3)
- TN30P (6)
- TN4000 (6)
- TTM09 (3)
- TTR-X (2)
- TTS (6)
- WBH20P (3)
- WBK40U (1)
- WDN25U (2)
- WK05CT (8)
- WK15CT (5)
- WK20CT (11)
- WM15CT (6)
- WM25CT (8)
- WM35CT (8)
- WP15CT (8)
- WP25CT (8)
- WP35CT (8)
- WS10PT (6)
- WS25PT (8)
- WU10HT (6)
- WU10PT (3)
- WU25PT (3)
Hand Of Tool
Hand Of Tool
- L (8)
- N (1)
- R (8)
Wiper Insert
Wiper Insert
- N (15)
- Y (1)
F Dimension
F Dimension
- 0.0 mm(1)
- 27.0 mm(5)
- 38.0 mm(6)
- 43.0 mm(5)
to
F Dimension
F Dimension
- 0.0 in(1)
- 1.063 in(5)
- 1.4961 in(6)
- 1.6929 in(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 mm(10)
- 86.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 in(10)
- 3.386 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 in(10)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(10)
to
Cutting Direction
Cutting Direction
- B (2)
- E (7)
- S (8)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (16)
- NEGATIVE-ZERO (1)
Maximum Bore Depth
Maximum Bore Depth
- 2.362 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 60.0 mm(2)
to
Front-End
Adapter Front-End
Adapter Front-End
- CUTOFF SUPPORT BLADE (4)
Clamp Style
Clamp Style
- C (11)
- P (8)
Front End Type
Front End Type
- PMK - Prismatic Adapter Kenna (4)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (3)
- S-SQUARE 90 (11)
- T-TRIANGLE 60 (5)
Front End Style
Front End Style
- PMK02 Cutoff Sup Bld A1-A3 (4)
Gage Length
Gage Length
- 4.4880 in(2)
- 5.2970 in(1)
- 5.2990 in(1)
Gage Length
Gage Length
- 114.0000 mm(2)
- 134.5500 mm(2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (8)
- B L (3)
- C A (13)
- C N (14)
- D P (2)
- H T (3)
- H W (15)
Back-End
Connection Type
Connection Type
- TAPER SHANK (17)
System Size
System Size
- KM63TS (21)
Back-End Diameter
Back-End Diameter
- 2.48 in(1)
- 2.4803 in(3)
to
Other
Insert Hand
Insert Hand
- N (15)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
