Specialty Turning • Pipe/Tube Scarfing - Toolholders
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (10)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
- K Cast Iron (10)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(10)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(10)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(10)
Over All Length [L]
Over All Length [L]
- 7.874 in(4)
- 9.8425 in(6)
komu
Over All Length [L]
Over All Length [L]
- 200.0 mm(4)
- 250.0 mm(6)
komu
Corner Radius
Corner Radius
- 0.354 in(10)
- 0.394 in(10)
- 0.472 in(10)
- 0.512 in(10)
- 0.591 in(10)
- 0.709 in(10)
- 0.787 in(10)
- 0.866 in(10)
- 0.984 in(10)
- 1.063 in(10)
- 1.102 in(10)
- 1.181 in(10)
- 1.378 in(10)
- 1.575 in(10)
- 1.772 in(10)
- 1.969 in(10)
- 2.165 in(10)
- 2.362 in(10)
- 2.559 in(10)
- 2.953 in(10)
- 3.15 in(10)
komu
Corner Radius
Corner Radius
- 9.0 mm(10)
- 10.0 mm(10)
- 12.0 mm(10)
- 13.0 mm(10)
- 15.0 mm(10)
- 18.0 mm(10)
- 20.0 mm(10)
- 22.0 mm(10)
- 25.0 mm(10)
- 27.0 mm(10)
- 28.0 mm(10)
- 30.0 mm(10)
- 35.0 mm(10)
- 40.0 mm(10)
- 45.0 mm(10)
- 50.0 mm(10)
- 55.0 mm(10)
- 60.0 mm(10)
- 65.0 mm(10)
- 75.0 mm(10)
- 80.0 mm(10)
komu
application
Hand Of Tool
Hand Of Tool
- L (5)
- R (5)
F Dimension
F Dimension
- 25.0 mm(8)
- 40.0 mm(2)
komu
F Dimension
F Dimension
- 0.9843 in(8)
- 1.5748 in(2)
komu
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(3)
komu
frontEnd
Maximum Cutting Depth
Maximum Cutting Depth
- 35.0 mm(3)
komu
backEnd
Shank Height
Shank Height
- 0.7874 in(4)
- 0.9843 in(4)
- 1.2598 in(2)
komu
Shank Height
Shank Height
- 20.0 mm(4)
- 25.0 mm(4)
- 32.0 mm(2)
komu
Shank Width
Shank Width
- 0.7874 in(4)
- 0.9843 in(4)
- 1.2598 in(2)
komu
Shank Width
Shank Width
- 20.0 mm(4)
- 25.0 mm(4)
- 32.0 mm(2)
komu
No filters matching ""
