RD16

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (14)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
    • M Stainless Steel (14)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
    • K Cast Iron (14)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
    • S High-Temp Alloys (14)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
    Select All Star
    • CN (2)
    • DE (9)
    • SG (1)
    • US (1)
    Applications
    Applications
    • Face MillingFace Milling (15)
    • PocketPocket (15)
    • Pocket HelicalPocket Helical (15)
    • Pocket MillingPocket Milling (15)
    • Profile MillingProfile Milling (15)
    • RampingRamping (15)
    • Shoulder Ball NoseShoulder Ball Nose (15)
    • Shoulder MillingShoulder Milling (15)
    • Slot MillingSlot Milling (15)
    • Slot Square EndSlot Square End (15)
    Cutting Diameter
    Cutting Diameter
    • 0.6299 in(1)
    • 1.3386 in(2)
    • 1.37 in(1)
    • 1.4173 in(1)
    • 1.8504 in(2)
    • 1.9685 in(1)
    • 2.5197 in(2)
    • 3.3071 in(2)
    • 4.2913 in(2)
    • 5.6693 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 16.0 mm(1)
    • 34.0 mm(2)
    • 34.798 mm(1)
    • 36.0 mm(1)
    • 47.0 mm(2)
    • 50.0 mm(1)
    • 64.0 mm(2)
    • 84.0 mm(2)
    • 109.0 mm(2)
    • 144.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Reach
    Reach
    • 1.5748 in(6)
    • 1.63 in(1)
    • 1.9685 in(6)
    • 2.4803 in(1)
    • 3.228 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(6)
    • 41.402 mm(1)
    • 50.0 mm(6)
    • 63.0 mm(1)
    • 82.0 mm(1)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (4)
    • B-Cutter Retention Screw (9)
    • SHCS or RetScrw Or BoltCircle (1)
    • Weldon (1)
    Number of Flutes
    Number of Flutes
    • 2 (1)
    • 4 (5)
    • 5 (3)
    • 6 (2)
    • 7 (2)
    • 8 (1)
    • 9 (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (14)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5748 in(6)
    • 1.63 in(1)
    • 1.9685 in(6)
    • 2.4803 in(1)
    • 5.59 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(6)
    • 41.402 mm(1)
    • 50.0 mm(6)
    • 63.0 mm(1)
    • 142.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.315 in(14)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 8.0 mm(14)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(14)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(14)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TN6525 (8)
    • TN6540 (14)
    • TTM08 (6)
    • WK15CM (8)
    • WP35CM (14)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.25 (1)
    • 1.75 (1)
    • 2.25 (1)
    • 2.75 (2)
    • 3.75 (2)
    • 4.0 (1)
    • 4.75 (1)
    • 5.75 (1)
    • 6.0 (1)
    • 7.0 (1)
    • 7.75 (1)
    • 10.25 (1)
    • 12.0 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • R-ROUND (14)
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (1)
    • SHELL MILL (14)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(1)
    • 22.0 mm(3)
    • 27.0 mm(5)
    • 32.0 mm(3)
    • 40.0 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(1)
    • 0.8661 in(3)
    • 1.063 in(5)
    • 1.2598 in(3)
    • 1.5748 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Number of Inserts
    Number of Inserts
    • 2.0 (1)
    • 4.0 (5)
    • 5.0 (3)
    • 6.0 (2)
    • 7.0 (2)
    • 8.0 (1)
    • 9.0 (1)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 3.228 in(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 82.0 mm(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)